01
Cut · crush · recover
Demolition & Recycling Attachments
Choose excavator demolition and recycling attachments by work stage: hydraulic shears cut structural steel, pulverizers separate concrete and rebar, crusher buckets reduce suitable mineral feed, and grabs or magnets recover sorted material. Match each tool to the material, carrier hydraulics and lifting capacity before configuration review.
View recommended attachmentsWorking outcome
Select the jaw, blade, rotation and hydraulic package around the structure and recovered material.
Typical conditions
- Primary and secondary demolition
- Concrete and rebar separation
- Steel and vehicle processing
- On-site material recovery
Data to confirm
- Material thickness and reinforcement
- Required rotation and handling accuracy
- Available flow and pressure
- Target output size or recovered fraction
Quick answer
SELECT THE TOOL BY WORK STAGE.
Demolition attachments for excavators are selected by work stage: hydraulic shears cut steel during primary dismantling, pulverizers separate concrete and rebar during secondary demolition, crusher buckets reduce suitable mineral feed for reuse, and grabs or lifting magnets sort and recover steel. Carrier weight alone is not enough; flow, pressure, lifting capacity, attachment geometry and the material section must be confirmed. Browse the full range of excavator attachments for recycling, including car dismantlers and lifting magnets.
Secondary separation
Concrete thickness, reinforcement and required recovered steel
On-site size reduction
Maximum feed, reinforcement, target outlet and downstream reuse
Sorting and recovery
Material composition, piece shape, lift weight and sorting accuracy
Recommended starting points
Attachments for Demolition & Recycling Attachments
These products narrow the starting range. Final geometry, wear system and hydraulics are confirmed against the machine and job.
Application questions
DIRECT ANSWERS FOR A BUILDABLE WORKFLOW.
Which excavator attachments should I use at each demolition and recycling stage?
Use a hydraulic shear for primary steel cutting, a pulverizer for secondary concrete and rebar separation, a crusher bucket for suitable mineral size reduction and reuse, and an orange-peel grab or lifting magnet for sorting and steel recovery. The structure, material stream and desired recovered output determine the sequence.
How do I choose between a hydraulic shear and a pulverizer?
Choose a shear when the primary task is cutting steel sections or dismantling structures. Choose a pulverizer when the task is crushing concrete and separating reinforcing steel during secondary demolition. Material thickness, jaw geometry and carrier hydraulics still require model-specific review.
Which excavator attachments suit concrete and steel recycling?
Use hydraulic shears for steel cutting and structure dismantling, pulverizers for separating reinforcing steel from concrete, crusher buckets for suitable concrete or mineral size reduction, and lifting magnets or orange-peel grabs for sorted steel recovery. Define the material stream, largest piece and target recovered fraction before choosing the attachment family.
What carrier data is required for a demolition attachment?
Provide carrier make, model, operating weight, lift chart where applicable, pin or coupler dimensions, auxiliary flow and pressure, return-line arrangement, required rotation functions and the intended material and duty cycle.
Application review
SEND THE MACHINE.
DEFINE THE WORK.
Requesta match



